Spectra Verde 4U, User Manual, Page: 86 / 244

Chapter 4 — Managing Network Attached Storage Managing NAS Replication
September 2017 User Guide — Spectra Verde Array
86
Restoring Files from a Verde Replication Target
If the source Verde array in a replication configuration fails, you can
restore files from the replication target array. Use the instructions in this
section to restore files from a Verde replication target.
1. Log into the replication target Verde array as described in Log In to the
Verde User Interface on page 42 .
2. Clear the write ‐ protected status of the replicated volume.
Note: You cannot share a write ‐ protected volume.
a. From the menu bar, select Configuration > NAS > Volumes . The
Volumes screen displays.
b. Select the replicated volume and select Action > Edit . The Edit
volume name dialog box displays.
c. Clear the Read Only check box.
d. Click Save .
3. Depending on your operating system environment, create either a CIFS
or NFS share, selecting the replicated volume during the creation
process. See Create a New Share on page 56 for instructions.
4. If desired, write protect the replicated volume before you copy files
from the volume.
Note: Spectra Logic highly recommends that you write ‐ protect the
volume after sharing it.
a. From the menu bar, select Configuration > NAS > Volumes . The
Volumes screen displays.
b. Select the replicated volume and select Action > Edit . The Edit
volume name dialog box displays.
c. Select the Read Only check box.
d. Click Save .
5. Using your host machine, connect to the new share on the Verde
replication target array.
6. Copy the needed files from the Verde replication target share.
7. If desired, delete the share once you have restored the needed files. See
Delete a Share on page 111 .
Disable a Folder Replication
Use the instructions in this section to prevent any further replication from
a volume currently configured to use replication.
1. On the source array user interface, select Configuration > NAS >
Volumes . The Volumes screen displays.