Spectra Verde 4U, User Manual, Page: 142 / 244

Chapter 8 — Maintaining a Verde Array Replacing a Failed Component
September 2017 User Guide — Spectra Verde Array
142
3. When the drive sled is in position, push the handle inward and to the
right until the locking tab secures it in place. An audible click indicates
that the drive sled is locked into position.
4. If necessary, reinstall the front bezel.
R
EPLACING A
F
AILED
C
OMPONENT
If a component in a Verde array is not functioning properly, the system
generates a message and the hardware icon on the status bar of the Verde
user interface changes to an error icon (see Status Icons on page 35 ).
Identify the Failed Component
1.
From the menu bar, select Status > Hardware . The Hardware screen
displays. The malfunctioning component is indicated by an error icon.
Figure 114 The Hardware screen showing a failed component.