29
Area
Icon or Data
Reported
Meaning
[8]
The receiver is powered from the AC/DC power sup-
ply, not from its battery.
[7], (8]
The battery is being charged from the external DC
source (first icon is animated to show charging).
[9]
Modem
:
(Blank)
Modem turned off.
or
Modem turned on:
• Blinking: Not initialized yet
• Static: Initialized and ready for a connection
The vertical bars indicate the signal strength at the
modem antenna input. The higher the number of
bars the better.
The antenna symbol shown in the upper left corner
stands for “2G”. If the modem detects a 3G network,
“3G” is displayed instead.
When the signal strength is very weak, four dots appear
at the bottom of the icon, instead of vertical bars.
Modem on line/connected to the cellular network.
[10]
WiFi
:
(Blank)
WiFi turned off.
WiFi Client active (1 to 3 waves depending on signal
level).(1 wave: no signal yet). (Blinking icon: WiFi Ini-
tializing.)
Data being transmitted over WiFi (2 to 3 waves).
[11]
Ethernet connection active
Data flowing through Ethernet connection
(Blank)
No Ethernet connection
[12]
Bluetooth, Radio, USB
:
Bluetooth connection active
Internal radio connected, but not used
Internal radio used respectively as receiver, transmit-
ter or repeater
USB connection active
/
/
/
/
Any combination of the five icons is possible. Icons
appear in succession every 1 second.
(Blank)
No Bluetooth or USB connection active, no internal
radio installed.
[13]
WiFi (continued):
WiFi Access Point active (Blinking icon: WiFi Initializ-
ing).
