27
•
: When a function title is displayed, use the
vertical (up and down) arrow keys to scroll through the
possible options, if any.
Where
Settings
is displayed and after selecting it, use the
vertical arrow keys to make a selection within a choice of
possible parameters.
Vertical arrows are also to be used when you are requested
to enter numerical values, such as repeater delay or static
IP address. In this case, use vertical arrows to set a value
for each digit.
In fields that combine letters and figures (password for
example), a long press on either of these keys allows you to
switch between lower-case, upper-case and numeric entry.
•
: Use the
OK
button to enter the edit mode (for those
functions that have one) or to validate a selected
parameter.
• Where options are listed for you to choose, the currently
active option is marked with a right arrow (
).
• The General status screen has no associated edit mode
but should error messages be reported, the
OK
button can
then be used as acknowledgment. Press
OK
as many
times as there are error messages to be acknowledged.
•
Display Settings
and
Advanced settings
are access points to
additional parameters. After you have selected one of
them, just press one of the vertical keys to select an option
in the menu. Then press the
OK
button to enter the edit
mode for this parameter.
•
: Use the
Escape
button to go up to the “parent”
screen, when applicable. A long press on the
Escape
button will take you back from anywhere to the General
Status screen (except if you are editing a value).
NOTICE: The screenshots illustrating this section are just examples. Your
receiver may show different information depending on its own configuration.
General Status
See examples below for a rover (left) and a base (right). Refer
to the tables below for more details on each of the icons or
data reported on this screen.
OK
[1]
[2]
[3]
[4]
[5]
[6]
[1]
[2]
[3]
[4]
[12]
[7] [8]
[10][11]
[9]
[12]
[7] [8]
[10][11]
[9]
[5]
[6]
[13]
