2
First Steps
Unpacking
In its basic version, the SP90m is delivered with a transport
bag, a Li-Ion battery, a dual-battery charger with battery
inserts, an AC/DC power supply, a Bluetooth/WiFi antenna
and accessories (see details in
).
Additionally, a choice of GNSS antenna and coaxial cable
should have been made, as well as that of a country-specific
power cord.
When the chosen model of SP90m includes an internal radio,
the power cable is different and a UHF antenna is added to
the supply (see details on
).
Basic Setup
You may have the Li-Ion battery charged separately on the
dual-battery charger (see
) or it can be placed in the
) to be charged by the external DC
source (AC/DC power supply) when connected as indicated
below.
Default
Configuration
The SP90m is shipped from the factory in the following
configuration:
• Antenna configuration: Single antenna (GNSS input #1)
• Selected GNSS constellations and signals: All
• Elevation mask (for position and raw data): 5 degrees
• Anti-theft and startup protection: Both OFF
• Base Mode: OFF (the receiver will operate as a rover)
• Receiver with internal radio: Radio is ON
• GSM, WiFi: Both devices OFF
• Bluetooth, Ethernet: Both devices ON
• Raw data recording: OFF
• Internal GSM antenna is used
• Preset messages for raw data recording: ATOM (PVT, ATR,
NAV, DAT, RNX-0, OCC)
• Distance unit used: Meters
• No corrections messages preset to be generated in base mode
1
AC/DC Power Supply
Power Line
SAE-to-DC Adapter
Coaxial cable
GNSS Antenna
Power Cord
Bluetooth/WiFi
Antenna
