Engl
ish
7
Discover Your New Equipment
Take a few minutes to discover your new SP60.
Front Panel
•
[1]
: Control panel, consists of the following items, from
left to right (see picture):
–
[2]
: Bluetooth LED
–
[3]
: Data recording LED
–
[4]
: Power LED
–
[5]
: Power/Configuration button
–
[6]
: Satellite tracking/Position LED
–
[7]
: UHF Radio LED
SP60 Control Panel Description on page 14
for more
information.
•
[8]
: 5/8” threaded insert for rod mounting. This part is
securely mounted on a removable plate, thus making up
an assembly that can be replaced with a UHF module
(optional accessory) fitted with its own, specific threaded
hole and central coaxial socket for antenna connection
(see
Using the UHF Kit Option on page 23
).
•
[9]
: Power/data connector (DC input + RS232 serial port
A). The connector socket is protected by a black rubber
cap attached to the receiver case. Always keep the
protection cap on when the connector is not used. This
cap is a non-polarized one.
IMPORTANT: When you connect a cable to that connector,
be sure you align the red markings (a red dot on the plug,
a red line on the socket) before pushing the Lemo plug in.
[1]
[8]
[9]
[10]
[11]
[12]
[13]
[2]
[4]
[7]
[3]
[6]
[5]
Summary of Contents for SP60 GNSS
Page 1: ...User Guide SP60 GNSS Receiver August 2016 Release...
Page 8: ......
