Spectra Precision Focus 30, User Manual

Page: 59 / 126

Spectra Precision FOCUS 30 User Guide 43
4 Setup
Starting and Settings via Face2 Control Unit
Start Screen
Before following any of the instructions below, put the instrument in the Face2 posi-
tion. Start the instrument by pressing the trigger key for one single beep.
Screen Actions and Comments
Fig. 4-19 Start screen Face2 Control Unit
Starting... R 1.00
After starting the screen will display the Spectra
Precision logo and the firmware version. The
instrument checks for an available connection on
the set Radio channel and Network ID for
several seconds and then goes to
Waiting state.
Fig. 4-20 Instrument Status Menu - Waiting
Instrument Status
Waiting
Radio channel: 3
Network ID:
3
1. First function - Key description
–
U
- Change Face
–
N
- Scroll up
–
O
- Scroll down
–
P
- Enter
2. Second function - on screen symbols
–
N
- Leveling Menu
–
P
- Instrument Settings
Note –
StepDrive motor system and Focus system are usable while the
Instrument
Status menu shows Waiting .