Chapter 3. Using the HTTP Interface
24
The Protocols screen will display the protocol page for whichever type of licensed
protocol you have enabled (iSCSI, or NDMP).
iSCSI
The following parameters should be configured to match the capabilities of the iSCSI
initiators that are connecting to the NAStape. Select
Change iSCSI and iSNS
to save the
information.
iSCSI Access Control
iSCSI Port
The default iSCSI listen port number is 3260. This is the IANA assigned port
for iSCSI and should not be modified under normal conditions.
Authentication
Select
None
if you do not wish to have an authentication method enabled.
Select Challenge Handshake Authentication Protocol (CHAP) authentication which
uses MD5 encrypted passwords and usernames.
Header and Data Digest
Select
None
if you do not wish to have a header or data digest.
Cyclic Redundancy Check 32 (CRC-32) detects data transmission errors.
Protocols
Figure 3-5
The Protocols screen for iSCSI.
