Chapter 7 - Configuring Network Attached Storage
Configure NAS Services
Configure the NFI Service to Use the Remote BlackPearl
Figure 143
The Configure dialog box for a local BlackPearl.
a.
Select
Use remote BlackPearl
b.
Enter the IP address or the DNS name of the data port of the BlackPearl system to
which you want to connect in the
BlackPearl System
entry field. If you do not know
the IP address or DNS name of the data port on the BlackPearl system, select
Configuration > Network
to view the Network screen.
Note:
If your system is running BlackPearl software version 3.5.3, or later, all BlackPearl
NFI targets must use BlackPearl 3.3.0, or later.
c.
Enter a value for the
S3 Username
. The S3 Username helps you identify the user
credentials provided for the BlackPearl system.
d.
Enter the S3 security credentials of a user previously created on the BlackPearl
system in the
S3 Access ID
and
S3 Secret Key
fields. See
.
e.
Click
Create
.
If desired, repeat the appropriate section to configure additional BlackPearl systems or
additional S3 security credentials.
Configure the NFS Service
The BlackPearl user interface lets you configure the transmission protocols and number of
threads used by the NFS service. Use the following steps to edit the NFS service.
1.
Select
Configuration > Services
to display the Services screen (see
).
November 2020
User Guide-BlackPearl Converged Storage System
- 236 -
