Chapter 6 - Additional Configuration Options
Configure Certificates
Delete a User or S3 Group
1.
From the menu bar, select
Configuration > Users
. The Users screen displays a list of all
configured users and S3 groups (see
).
2.
Select the user or S3 group you want to delete, and then select
Action > Delete
. A
confirmation window displays.
3.
Click
Delete
to delete the user or S3 group.
C
ONFIGURE
C
ERTIFICATES
The BlackPearl system ships with non-signed SSL certificates for both the data and
management ports on the system. Because the certificates are not signed, you must pass a
security check every time you attempt to access the management port to view the BlackPearl
user interface, or when you attempt to transfer data using the data port.
If desired, you can install signed, trusted SSL certificates for your data and management
ports so that you no longer need to pass the security check when accessing these ports.
The BlackPearl system accepts intermediate (chain) SSL certificates, and accepts RSA, DSA,
and ECC certificates. The BlackPearl system accepts both encrypted and non-encrypted
certificates.
Use the instructions in this section to install an SSL certificate.
1.
From the menu bar, select
Configuration > Certificates
. The Certificates screen displays.
Figure 120
The Certificates screen.
2.
Select either the
Management
or
Data
row, depending on for which port you want to
install a new SSL certificate.
November 2020
User Guide-BlackPearl Converged Storage System
- 210 -
