Chapter 6 - Additional Configuration Options
Configure Network Connections and Settings
Clear a Data Port Configuration
In some cases, it may be useful to delete an existing data port configuration by clearing it.
Use the instruction in this section to clear a data port configuration.
Note:
The management port cannot be cleared. See
Configure the Management Port on
to change the management port settings.
1.
From the menu bar, select
Configuration > Network
, or click the Network pane from the
Dashboard screen. The Network screen displays (see
).
2.
Select the row of the configuration you want to clear and select
Action > Clear
from the menu bar. A confirmation window displays.
3.
Click
Delete
to clear the Ethernet configuration.
Configure DNS Settings
The DNS settings on the BlackPearl system are used to allow domain name lookup on the
system. Use the following instructions to enter DNS information on the system.
1.
From the menu bar, select
Configuration > Network
, or click the Network pane from the
Dashboard screen. The Network screen displays (see
).
2.
In the DNS pane of the Network screen, double-click the single row, or select the row
and then select
Action > Edit
. The Edit DNS screen displays.
Figure 88
Edit DNS information.
November 2020
User Guide-BlackPearl Converged Storage System
- 178 -
