Chapter 4 - Configuring Advanced Bucket Management
Create a Data Policy
5.
Use the
Tape Type
drop-down menu to select the media type for a tape partition.
Notes:
• You must select the media type that matches the media present in the tape
library partition. If the partition contains multiple generations of media, select
the highest version.
• This option does not display if you selected a disk partition in
.
6.
Enter a percentage for the
Automatic Compaction Threshold
. Automatic compaction
occurs when the percentage of deleted objects on a tape cartridge exceeds this value. The
default percentage is 95.
Note:
If you selected a disk partition in
, this setting is unavailable.
7.
Use the
Write Preference
drop-down menu to select the write preference for this member
of the storage domain. This setting determines the preferred usage of the partition when
additional capacity is needed. The system uses a partition with
High
write preference
before a partition with
Normal
write preference, and so on. Use
Never Select
to indicate
that a partition is read-only.
8.
Click
Create
. The new storage domain member displays on the Storage Domain details
screen.
C
REATE A
D
ATA
P
OLICY
A data policy defines data integrity policies, default job attributes, and persistence and
replication rules, which define where data is written and for how long it is kept. A data
policy may be used by multiple buckets, but a bucket uses precisely one data policy.
Use the instructions in this section to create a new data policy.
1.
From the menu bar, select
Configuration > Advanced Bucket Management > Storage &
Data Policy Management
to display the Advanced Bucket Management screen (see
).
November 2020
User Guide-BlackPearl Converged Storage System
- 125 -
