Chapter 4 - Configuring Advanced Bucket Management
Create a Storage Domain
Create a Daily Schedule
i.
Select
Daily
as the interval for the tape ejection schedule (see
).
ii.
Enter a time value for
Start Time
, and include AM or PM after the value. This
field is not case sensitive.
iii.
Enter a number for
Every _ days
. This value specifies the interval, in days, between
ejecting tapes.
Create a Weekly Schedule
i.
Select
Weekly
as the interval for the tape ejection schedule (see
).
ii.
Enter a time value for
Start Time
, and include AM or PM after the value. This
field is not case sensitive.
iii.
Select one or more days for
Every week on:
. This determines the day(s) of each
week the system ejects tapes.
9.
Click
Create
. The new storage domain displays on the Advanced Bucket Management
screen.
Add a Storage Domain Member to a Storage Domain
Once a storage domain is created, you must add storage domain members. Entire data
partition/media type combinations are members of storage domains. When a bucket requires
additional capacity, a single disk partition or tape cartridge is allocated out of the members
to fulfill the capacity requirement.
Use the instructions in this section to add a storage domain member to a storage domain.
1.
From the menu bar, select
Configuration > Advanced Bucket Management > Storage &
Data Policy Management
to display the Advanced Bucket Management screen (see
).
November 2020
User Guide-BlackPearl Converged Storage System
- 123 -
