4 Setup
Screen
Actions and Comments
External EDM Calibration
When entering this menu the cursor stays always at the
P
key. Press
P
when number is correct - the system
jumps back to the
Service Menu
.
To enter another value press
N
or
O
and the first digit
of the
Scale
is active (inverse) and with
N
and
O
the
numbers 0-9 can be selected. Press
P
when number is
correct - cursor jumps to the next digit.
After you have selected the last digit for the
Scale
press
P
. The cursor jumps to the settings for
Offset
with the
same procedure.
When last digit of
Offset
is confirmed, the system jumps
back with the cursor to the inverse
P
symbol.
Press
P
key a further time - the system jumps to
Service Menu
.
Service Menu - Drive Mode
Settings for Drive Mode
Drive Mode
settings have an effect while using LockNGo
Tracker technology for robotic surveying or while
changing face.
Press
N
and
O
to scroll to
Drive Mode
and then press
P
.
Drive Mode
Press
N
and
O
to select
Normal
or
Fast
and then
press
P
.
FOCUS 35 Total Station User Guide |
66
Summary of Contents for Focus 35
Page 1: ...FOCUS 35 Total Station User Guide...
Page 109: ......
