WARNING
Please read and follow all of the instructions & safety precautions detailed below prior
to using this product. Failure to do so may result in serious personal injury and / or
property damage.
Safety Precautions
Do not expose this product to heat sources (including open flame or direct
sunlight).
Do not expose this product to water or liquids. If liquid enters the product,
immediately unplug the product from any connected power sources or devices.
Do not disassemble or modify the product.
Avoid dropping this product (or any other heavy impact which might damage the
internal circuit).
In the unlikely event of any abnormalities (such as strange odor, overheating,
leaking, color change, etc.), discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth
only).
Only use attachments/accessories specified by the manufacturer.
Dispose of this item properly (do not dispose of it in trash receptacles and do
not attempt to incinerate it).
Do not leave this product unattended while it is being charged.
This product is not a toy: KEEP AWAY FROM CHILDREN.
Only re-charge this device using a USB port wall adapter (not included).
Do not re-charge via USB port on a computer.
Do not use this product while it is being charged.
When not being used for prolonged periods of time please charge every 3
months to avoid damaging the battery.
It is recommended to fully recharge this item prior to initial use
XV-078 User Manual
The
XV-078
is a wireless V4.1 speaker. Please read below product specifications &
user guide.
XV-078 Specifications
Battery Type: Grade A Non-Recycled Lithium Polymer battery
Battery Duration/Lifespan (Charge/Discharge): 500 times
Battery Capacity: 400 mAh
Power Input & Current: DC 5V/0.6A
Sound Output: 3Watts (1 speaker & 1 passive subwoofer)
Sensitivity: 75dB
Frequency Response: 50Hz-22KHz
Wireless Version: Wireless V4.1
SD Card Reader: 32G Max.
Distortion Rate: <0.5%
Range of Wireless Communication: within 10 meters
Re-Charge Time (0-100%): up to 2 hours
Playback Time: up to 3 hours (played at 50% volume)
Included in the box:
1 XV-078 wireless speaker
1 Micro-USB/USB charging cable
1 AUX audio cable
1 user manual
Product Size: 3 ¾” x 2 ¾” x 2 1/8”
Net Weight: 189g
XV-078 Product Map
XV-078 Operation
1. ON: press & hold multi-function button to power ON
2. Once XV-078 has been turned ON, it is automatically in WIRELESS mode
3. Insert SD card reader OR input audio cable to switch to SD card or AUX mode
4. OFF: press & hold multi-function button to power OFF
Wireless Pairing
1. Once XV-078 has been turned on, it is automatically in WIRELESS mode (blue
LED will flash quickly to indicate the speaker is ready for Wireless pairing)
2. Enable Bluetooth function on your electronic device.
3. Search Bluetooth signal
Spector XV-078
& pair
your device (blue LED will flash
slowly to indicate the XV-078 has been successfully paired)
NOTE: previously paired devices will automatically re-connect to the XV-078 speaker
when both devices are turned on & within range.
No. Description
1
Volume control dial -/+
2 LED
indicator
3 Skip
songs
4 Multi-Function
button
5 Previous
songs
6 Passive
sub-woofer
7 AUX
port
8 Microphone
9
USB output port
10
Micro/USB input port
11 MSD
card
reader
Wireless Mode
1. Play/Pause : press multi-function button once
2. Volume control: turn volume dial
3. Skip songs: press skip song
button once (see #3 in Product Map)
4. Previous songs: press previous song
button once (see #5 in Product Map)
5. Answer/end incoming calls: press multi-function button once
6. Rejecting incoming calls can be controlled directly from your audio device
FM Radio mode
NOTE: Plug the 3.5mm AUX cable (included) into the XV-078 while in FM radio
mode. The cable will act as an antenna and will improve the radio signal.
1. To activate FM radio, turn speaker ON & press the multi-function button quickly
twice. When static noise can be heard, FM mode has been successfully
activated.
2. Press the multi-function button once to initiate the scan of all accessible FM
radio stations (it can take up to a minute to scan & identify all available stations)
3. Once initial scan is complete, press
or
buttons to switch radio stations
4. Press the multi-function button twice quickly to switch back to Wireless Mode or
AUX mode
AUX Mode
1. To activate AUX mode, plug in 3.5mm AUX audio cable into your audio device &
the XV-078
2. Play/Pause/Volume: can be controlled on the XV-078 and/or directly on your
audio device
3. Skipping songs/volume control & answer/end incoming calls can be controlled
directly on your audio device
MSD Card Mode
1. Insert your MSD card & music will automatically begin playing
2. Play/Pause: press once on the multi-function button
3. Skip songs: press skip song
button once
4. Previous songs: press previous song
button once
5. Volume control: turn volume control dial
6. Press on card to eject
USB Mode
1. Insert USB key into the XV-078 & music will automatically begin playing
2. Play/Pause: press once on the multi-function button
3. Skip songs: press skip song
button once
4. Previous songs: press previous song
button once
5. Volume control: turn volume control dial
6. Pull USB to remove from XV-078
To Charge the XV-078
1. Insert micro USB charging cable into the input port of the
XV-078
via wall
adapter (not included)
2. A solid red LED (located near the micro-USB port) indicates the device is
charging (red LED will turn OFF once fully charged)
3. To stop charging, press & hold the multi-function button & disconnect the
charging cable
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient
or
relocate
the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning
:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
