SPECS CCX 70, User Manual

Page: 20 / 40

CCX 70
V1.1 | 29 April 2016
Figure 3: Chiller menu
You can edit the following parameters:
Ÿ Flow rate lower limit.
Ÿ Temperature lower limit.
Ÿ Temperature upper limit.
Ÿ Pressure upper limit.
To edit parameters in the Chiller menu:
1. Use the
▲
and
▼
keys to move the cursor to the parameter you want to change.
2. Press
OK
to edit the parameter.
3. Turn the encoder wheel to set the value.
4. Press
OK to accept the value.
The following parameters are grayed out and are read-only:
Ÿ Current flow rate.
Ÿ Current temperature.
Ÿ Current pressure.
Ÿ
Water current.
4.3 Software
SpecsLab Prodigy has facilities for controlling an X-ray source via the UXC 1000. You can view
the properties of the CCX 70 in the device control for the UXC 1000 as well as setting limits for
the cooling water.
Note
You need to configure SpecsLab Prodigy so that the UXC 1000 device control is available.
Please see the SpecsLab Prodigy Quick Guide for information about using the SpecsLab Prodigy
Config Tool.
16