background image

CAUTION: TO REDUCE THE RISK 
OF ELECTRIC SHOCK, DO NOT 
OPEN COVER. NO USER 
SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

WARNING: REMOVAL OF THE 

COVER SHOULD ONLY BE PER- 

FORMED BY QUALIFIED SERVICE 
PERSONNEL - NOT USER SER- 
VICEABLE. THE UNIT SHOULD 

ALWAYS BE UNPLUGGED BEFORE 

REMOVING THE COVER, AND 
REMAIN UNPLUGGED WHILE THE 

COVER IS REMOVED.

WARNING: TO PREVENT FIRE 
OR SHOCK HAZARD, DO NOT 

EXPOSE UNITS NOT 

SPECIFICALLY DESIGNED FOR 
OUTDOOR USE TO RAIN OR 

MOISTURE.

INSTRUCTION
MANUAL

PUBLIC ADDRESS
AMPLIFIER

PMM-120A

PMM-60A

    RISK OF ELECTRIC 

SHOCK, DO NOT OPEN!

120 WATT RMS

60 WATT RMS

200 NEW HIGHWAY, AMITYVILLE, NY11701

PHONE : 1-800-645-5516, 631-957-8700 IN METRO NY
http://www.specotech.com

1.Unpacking

After removing the amplifier from the carton, inspect for any exterior damage to
the unit. If damage is noted, notify the carrier at once so that a claim can be
justified. Save all packing material. This is important when the claim is 

processed.

PRECAUTIONS

2.Ventilation

To offset heat generated by the unit, it is necessary to provide ample ventilation
around the unit. Avoid blocking or impeding the ventilation holes on the unit. To

prevent unnecessary problems, install the unit in a place free from any 

vibrations, direct sunlight, humidity or dust circulation.

3.Avoid spilling liquids or allowing materials to enter the  

   cabinet

If the unit gets wet or any foreign material enters the cabinet, immediately

disconnect the A.C. line cord and consult your dealer or qualified technician.

 

Summary of Contents for PMM-120A













Reviews: