Playback & Backup
NVR User Manual
Zoom In
Click it to go to the zoom in interface. The zoom in
interface is similar to that of the camera window in
the live view interface. Click
to pause the
record playing; click
to play the record. When
the record is paused in forward playing mode, you
can click
to view the previous frame and click
to view the next frame.
Add Tag
Click it to add tag. You can play back the record by
searching the added tag. Click it and then enter the
tag name in the popup window. Click “Add” to add
tag.
Switch
Camera
Click it to switch the playback camera. Click it and
then check the camera in the popup window. Click
“OK” to change the camera.
Close Camera
Click it to close the playback camera.
Introduction of area ④:
You can check the record type as required for record playback; first you should click
on the tool bar at the bottom
of the interface to clear all the playback camera, then check the record type (
: manual record;
: sensor based
record;
: motion based record;
: schedule record;
: analytics record; and finally click
in the playback window
to add camera for playback (the record time scale will show the record data of the checked record type only after the
above operations).
Introduction of the record time scale (area ⑤):
Click
to set the date; click
to set the time and then the playback camera will play the record from the time you
set.
A tool bar will appear after moving the mouse to the record time scale. Click
/
to zoom the timeline; click
to recover the timeline to 24 hours’ ratio. Drag the timeline or slide the scroll wheel of the mouse on the time scale to
show the hidden time on the top or bottom of the timeline. You can also click
to show the hidden time on the top
of the timeline or click
to show the hidden time on the bottom of the timeline. Drag the slider at the bottom of the
time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block stands for manual record, red
block stands for sensor based record, yellow block stands for motion based record, blue block stands for schedule
record and cyan block stands for intelligence record. Click the record block to set the time and then the playback
camera will play the record from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or click
to pop up an
export information window. Click
button in the window to pop up the export window. Select the device, export path
and format and then click “Export” button to start the backup.
8.3 Smart Playback
Smart Playback Settings
Click
to go to the following interface. Set the value of “Speed of non-interest video” (Please skip this one if you
click “Skip non-interest video”), “Speed of interest video” and “Intrusion percentage”.
50