Record & Disk Management
NVR User Manual
There are all four disk groups. By using disk group, you can correspond the camera to disk (the record data of the
camera in the group will be stored into the disks in the same group). The NVR with e-SATA interface supports e-SATA
recording.
The added disks and cameras will be added into group one automatically. The disks and cameras in the groups can be
deleted except group one (select a disk group and then click
on the top right corner of the added disk or camera
to delete it from the group). The deleted disks and cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only be added into one
group. Select a disk group and then click
in the disk or camera row to pop up a window. Check the disks or
cameras in the window and then click “Add”.
7.5.3 View Disk and S.M.A.R.T. Information
Click Start
Settings
Disk
View Disk Information to view the HDD information; click “S.M.A.R.T. Information” to view
the working status of the HDD. Refer to the picture below.
46