Camera Management
NVR User Manual
password of the NVR/DVR. Check the added remote channel number and click “Test” to test the effectiveness
of the input information. Then click “OK” button to return to the previous interface.
Note:
Only the local NVR has unoccupied channels, may the IPC of other NVR/DVR in the same local network be
added. And the added IPC supports previewing and recording.
4.1.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click
to view the live image of the
camera in the popup window. Click
to edit the camera (see
Add camera
to delete the camera. Click
in the “Operation” header line and then click “Modify IPC Password” to pop up a
window (check the IPCs in the window, set the new password and then click “OK” button; only the online IPCs’
passwords can be modified and a batch of IPCs’ passwords can be modified at the same time). Click
to upgrade an
online IPC ( or click
in the “Upgrade” header line and then click “IPC Batch Upgrade” to upgrade a batch of IPCs),
select the device which stores the upgrade file in the “Device Name” item of the popup window and the upgrade file
in the list(you should select the upgrade IPC model in the window if a batch of IPCs’ passwords need to be modified)
and then click “Upgrade” button to start upgrading(the IPC will restart automatically after the upgrade is completed
successfully).
The IP cameras with PoE function which are directly connected to the PoE port of the NVR will be displayed
20