Speco N4NRL User Manual Download Page 21

Page: 21 / 77

Live View Introduction

NVR User Manual

Live View Introduction

5.1 Live View Interface Introduction

You should add camera first after logging on to the system (see 4.1.1 Add Camera for details). Refer to the interface as shown below, drag one camera

in the preview window to another window for camera window exchanging.

The record symbols with different colors in the live view window refer to different record types when recording: green stands for manual record, red

stands for sensor based record, yellow stands for motion based record, blue stands for schedule record and cyan stands for intelligence record.

Click the preview window to show the tool bar as shown in area ①; right click the preview window to show the menu list. The tool bar and menu

list are introduced in the table below.

Button

Menu List

Meaning

Move tool. Click it to move the tool

bar anywhere.

Manually Record On

Click it to start recording.

Instant Playback

Click

to playback the record; click “Instant Playback” to select

or self-define the instant playback time. See 8.1 Instant Playback for

details.

Enable Audio

Click it to enable audio. You can listen to the camera audio by

enabling audio.

Snap

Click it to pop up the snap window. Click “Save” in the window to

save the image. Click “Export” to export the image.

PTZ Control

Click it to go to PTZ control interface. See Chapter 6 PTZ for details.

Zoom In

Click it to go to single channel amplification interface.

Click it to go to image adjustment interface. Refer to 5.3.4 Image

Adjustment for details.

Camera Info

Click it to view the camera information.

The single channel amplification interface is as shown below. Press and drag the blue box to select the zoom in area. Click

to zoom

the image. Click the camera selection box to select other cameras for amplification. Click “Back” to return to the live view interface.

Summary of Contents for N4NRL














































































Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands

Speco N4NRL, User Manual

Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands