Speco N16NRP, User Manual

Page: 5 / 76

Introduction NVR User Manual
1
1 Introduction
1.1 Welcome
Thank you for purchasing this NVR.
If technical assistance is needed, please contact Speco Technologies Technical Support.
Phone: 1-800-645-5516 option 3
Email: techsupport@specotech.com
1.2 Features
Basic Functions

Supports network device access including IP camera/dome and the third party IP cameras

The NVR supports the latest H.265 video coding stream and a mixture input of H.265 and H.264 IP cameras

Supports standard ONVIF protocol

Supports dual stream recording of each camera

Supports IP cameras to be added quickly or manually

Supports collective or individual configuration of the cameras’ OSD, video parameters, mask, motion and so on

Supports a maximum of 8 user permission groups including Administrator, Advanced and Common which are the default permission groups of
the system

Supports a maximum of 16 users to be created, multiple web clients login by using one username at the same time and the user’s permission
control to be enabled or disabled

Supports multiple web clients login at the same time
Live View

Supports 4K×2K/1920×1080/1280×1024 HDMI and 1920×1080/1280×1024 VGA high definition synchronous display

Supports multi-screen modes such as 1/4/6/8/16

Supports auto adjustment of the camera’s image display proportion

Supports audio monitoring of the camera to be enabled or disabled

Supports manual snapshot of the camera

Supports the sequence of the cameras to be adjusted

Supports display mode to be added and saved and the saved modes can be called directly

Supports quick tool bar operation of the preview window

Supports camera group view and scheme view in sequence, quick sequence view and dwell time setting

Supports motion detection and video mask

Supports multiple popular P.T.Z. control protocol and setup of the preset and cruise

Supports direct mouse control of the IP dome including rotating, zoom, focusing and so on

Supports single camera image to be zoomed by sliding the scroll wheel of the mouse

Supports any area of the image to be zoomed in to a maximum of 16 times of the current size

Supports image and lens adjustment (only available for some cameras)

Supports quick camera adding in the camera window of the live view interface

The live camera sequence of the web client will keep consistent with that of the NVR after adjusting the live camera sequence of the NVR, but
the live camera sequence of the NVR will not be changed if that of the web client is changed
Disk Management

A maximum of 2 SATA HDDs

Each SATA interface of the NVR supports the HDDs with max 8TB storage capacity

Supports disk group configuration and management and each camera can be added into different disk groups with different storage capacity

Supports disk information and disk working status viewing

Supports formatting disks in batch
Record Configuration

Supports main stream and sub stream recording at the same time and collective or individual configuration of the record stream

Supports manual and auto record modes

Supports schedule recording, sensor alarm recording and motion detection recording, etc

Supports schedule recording and event recording setting with different record streams

Supports record schedule setting and recycle recording

Supports pre recording and delay recording configuration of the event recording