Alarm Management
NVR User Manual
45
②
Select the camera and enable the relevant detection as needed.
Scene Change
: Alarms will be triggered if the scene of the monitor video has changed.
Video Blurred
: Alarms will be triggered if the video becomes blurry.
Video Color Cast
: Alarms will be triggered if the video becomes obscured.
③
Set the sensitivity of the exception detection.
④
Click “Apply” to save the settings.
⑤
Click “Processing Mode” to go to the alarm handling configuration interface of exception detection.
Exception Alarm Handling Configuration
:
①
Click Start
Settings
Alarm
Intelligence Alarm
Exception to go to the interface.
②
Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of exception
detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
③
Click “Apply” to save the settings. You can click “Exception Config” to go to the exception detection configuration interface.
9.3.3 Tripwire
Line Crossing Configuration
:
Alarms will be triggered if someone or something crosses the pre-defined alarm line.
①
Click Start
Settings
Camera
Intelligent Analytics
Tripwire to go to the following interface.
