| Description |
8
Table 1: Power Connector Pin-out
pin #
I/O Type
Name
Description
1
O
ISO_OUT0
General purpose Output 0, single-ended output
2
O
ISO_STROBE
Default Strobe out, single-ended output
3
O
RESERVED
Reserved, do not connect
4
PWR
CAMERA_GND
Camera GND, 0V
5
PWR
CAMERA_PWR
Camera Power 12V (+/- 10%)
6
PWR
ISO_GND
I/O GND, 0V
7
I
ISO_IN0
General purpose input 0
8
I
ISO_TRIGGER
Default Trigger in (5-15 V)
9
O
RESERVED
Reserved, do not connect
10
O
RESERVED
Reserved, do not connect
11
O
RESERVED
Reserved, do not connect
12
O
RESERVED
Reserved, do not connect
Camera Link Camera External Interfaces
Camera Link Connector
There is a standard MDR 26-pin camera link connector on the back panel of the camera for camera control signals
and serial communication.
For more information on Camera Link connector, refer to Camera Link interface standard specifications.
LED Indications
There is one green LED in the FX camera back panel.
LED
Status
Not lit
Power off
Blinking green in startup
Starting up
Stable green
Power on, not recording
Blinking green
Recording, data being transferred
Note:
Camera blinks briefly during startup. This period can be very short and therefore easy to miss.
GigE Camera External Interfaces
GigE Connector
There is a standard GigE M12 X-coded Ethernet connector on the back panel of the camera for camera control signals
and serial communication.
All rights reserved - Specim, Spectral Imaging Oy Ltd.
