background image

20

ENGLISH

FR

ANÇAIS

DE

UT

SCH

ČESKÁ

HR

VA

TSKA

SLOVENSKI

12.3. BOLT SIZE / TORQUE SPECS

WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important 

for your safety. If too little force is applied, the fastener may not hold securely. If too much force is 

applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening 

force can result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and 

consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the 

components. The following is a summary of torque specifications in this guide:

TORQUE SPECS (LEVO FSR PIVOTS)*:

PIVOT LOCATION

IN-LBF Nm PIVOT LOCATION

IN-LBF Nm

MAIN (CARBON FRAME)

200

22.5 S-LINK @ SEATSTAY

130

14.7

MAIN (ALLOY FRAME)

182

20.5 S-LINK @ SHOCK EXTENSION

148

16.7

DROPOUT

113

12.8 LOWER SHOCK MOUNT

175

19.8

S-LINK @ FRAME

96

10.8 UPPER SHOCK EYE

113

12.8

TORQUE SPECS (KENEVO FSR PIVOTS)*:

PIVOT LOCATION

IN-LBF Nm PIVOT LOCATION

IN-LBF Nm

MAIN

182

20.5 S-LINK @ SHOCK EXTENSION

204

23

DROPOUT

204

23

LOWER SHOCK MOUNT

156

18

S-LINK @ FRAME

204

23

UPPER SHOCK EYE

156

18

S-LINK @ SEATSTAY

204

23

* Apply blue loctite to chainring bolts.
TORQUE SPECS (GENERAL LOCATIONS):

LOCATION

IN-LBF Nm LOCATION

IN-LBF Nm

SEAT COLLAR (30.9 POST)

45

5.1

SPIDER LOCKRING

443

50

SEAT COLLAR (34.9 POST)

55

6.2

DERAILLEUR HANGER

35

4

SEATPOST @ SADDLE

120

13.5 WATER BOTTLE BOLTS

25

2.8

STEM @ STEERER TUBE

45

5.1

REAR BRAKE GUIDES

6

0.7

STEM @ HANDLEBAR

45

5.1

BATTERY AXLE

88.5

10

CRANK BOLTS

443

50

REAR AXLE

133

15

CHAINRING BOLTS

89

10*

TORQUE SPECS (MOTOR MOUNTS):

LOCATION

IN-LBF Nm

LEVO/KENEVO ALLOY (ALL)

200

22.5

LEVO CARBON MAIN PIVOT

200

22.5

LEVO CARBON FORWARD

133

15

LEVO CARBON UPPER

133

15

LEVO CARBON LOWER

200

22.5

CAUTION: Ensure all contact surfaces are clean and bolt threads are greased or have a 

threadlocking compound prior to installation.

Summary of Contents for Turbo Levo FSR 6FATTIE



























Reviews: