Small MPS
Mobile Floor Base
ASSEMBLY MANUAL
Helpful Tools
large phillips screwdriver
crescent wrench
allen key
Included Parts:
> A. Wooden Sides
> B. Metal Seat Pan
> C. Metal Back Bracket
> D. Front Caster Brackets (2x)
A
> E. Casters (4x) (2 with Brake)
> F. Bolts (16x)
> G. Nuts (16x)
> H. Caster Nuts, Bolts, Washers (4 ea)
D
B
C
E
3 2 1
6
5
4
12
11
7
10
9
8
H
Step 1:
Attach Seat Pan
Step 2:
Attach Rear Bracket
Attach (B) metal seat pan to (A) wooden sides
with (6x) bolts. Install bolts in numeric order.
Finger-tighten bolts until snug.
Step 3:
Attach Front Brackets
Attach (D) front brackets to (A) wooden sides
with (4x) bolts. Finger tighten bolts first, then
securely tighten with wrench.
(Important : attach bracket to outside as shown)
Attach (C) metal back bracket to (A) wooden
sides with (6x) bolts. Finger tighten bolts first,
then securely tighten the rear bracket bolts and
seat pan bolts with wrench.
Step 4:
Attach Casters
Install brake casters in the rear for stability. Use
allen key to insert bolt up through the caster
and bracket. Tighten nylon nuts with a crescent
wrench. Note: Maintain tight screws.
c 2010 Ber
ger
on By Design • 15 South Second St. Dolgeville, NY 13329
• 1.866.529.8407
Model# 79XXXXXX
Revision 03/13
UMMPSSMB03-13LIT
