2. Getting
Started.
2.1. Checking System Requirements
Check to make sure that your computer meets the minimum requirements for the SM302 InGaAs system.
2.1.2.
Requirements for the Hardware
•
1 serial port for spectrograph communication
•
1 PCI slot for the data acquisition card
•
A mouse or any other pointing device
•
A VGA, SVGA display, or 1024x768
•
Any IBM compatible machine with a Pentium II processor or higher
2.1.3.
Requirements for Software
•
Minimum of 64 MB of RAM recommended.
•
A hard disk with at least 10MB free space, and 7MB for installation.
•
Microsoft Windows version 98 or newer in standard or enhanced mode.
2.1.4.
Checking System Package Contents
Check to make sure that your package contains all of the following components.The SM302 system
consists of:
•
1 SM302/SM302-EX unit.
•
1 SM302/SM302-EX Power supply.
•
NI-DAQ 6034E card.
•
1 DK12V10 CMSP110 power supply.
•
1 Y power cord for the CMSP110.
•
1 Standard RS-232 cable (9 to 9D sub)
•
1 68 pin cable
•
1 male 9 pin to male 9 pin cable.
•
1 male15 pin to male 15 pin cable.
•
1 Spectral Products Spectral Products Installation software CD.
•
1 SM302 user manual
•
1 software manual (LabView)
•
2 CDs for Ni-DAQ driver software.
2.1.5. Installing
Software
Refer to software manual (SM302/SM302 EX Spectra P/N 1080523) for instructions on installing and running
software.
Spectral Products
2659-A Pan American Frwy., NE Albuquerque, NM 87107 Tel (505) 343-9700 Fax (505) 343-9705
www.spectralproducts.com
- 6 -