Appendices
A.
SM302 /SM302 Power Supply Block Diagram
Figure 4.
Power Supply interface box block diagram.
B.
SM302 Power Supply Jumper Configuration
Figure 5
Hardware Jumper setting for SM302 Power Supply
To set power supply to run the SM302 standard, jumper to R12 is set for 5V (
JP1
). To set the SM302 Extended,
jumper R4 is set for 6V (
JP2
).
Spectral Products
2659-A Pan American Frwy., NE Albuquerque, NM 87107 Tel (505) 343-9700 Fax (505) 343-9705
www.spectralproducts.com
- 11 -
Logic Circuit
Filter
Power Supplies
Regulator
Video
Shutter Signal (BNC)
AC line Cord (120VAC
A/D Card
JP1
JP2