User Manual
8
2. Safety
Important!
It is important to read any associated safety
information in the accessory manual before operating the
USB Temperature Controller.
Warning:
The mains cable supplied with the desktop PSU
can only be replaced by an equivalent rated cable with earth
connection.
Indoor use only
No user serviceable parts. Specac Ltd and their authorised agents only
are permitted to carry out repairs.
Only clean with a soft, lightly dampened cloth. Do not use harsh and/or
abrasive cleaners on any Specac product. Consult Specac or their
authorised agent if in any doubt.
Also check before use that the safety protection provided has not been
compromised or impaired. The controller should be made inoperative
and be secured against unintended operation if in any doubt.
The protection is likely to be impaired if for example the controller:
•
Shows visible damage.
•
Fails to perform its intended use.
•
Has been subjected to adverse storage conditions.
•
Has been subjected to severe transport stresses.
Hot Surface:
Accessories used with this controller may
display a hot surface label, which warns that a nearby
surface may get hot. These surfaces must not be touched.
.