8999127: v1 14/08/2018
Page 2.4 of 2.5 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.6
Safe use
-
It is prohibited
to use the Quadsaw in ways that are different from the indications contained in Section 1.1
“Intended
use”.
-
It is prohibited
to use or have the Quadsaw used by anyone who has not read and completely understood the
information contained in this manual.
-
It is prohibited
to use or have the Quadsaw and the machine it is attached to unless the personnel are competent
and properly trained with good health and physical condition.
-
It is forbidden
to drive the agricultural tractor attached to the Quadsaw if the personnel do not have an appropriate
driving licence.
-
It is forbidden
to approach or stand close to the Quadsaw when the machine is running.
-
It is forbidden
to abandon the driver’s seat on the agricultural tractor with the combustion engine running when the
Quadsaw and power supply/PTO is running.
-
It is forbidden
to alter, tamper with or bypass the safety devices provided by the manufacturer.
-
It is forbidden
to operate the Quadsaw when the decals indicating the warning signs are missing or damaged. Have
them immediately replaced with other decals having the same meaning.
-
It is forbidden
to use the Quadsaw when components are missing.
-
It is prohibited
to come close and/or touch moving parts during the work.
-
It is prohibited
to tamper with, remove, damage or exclude any part of the Quadsaw.
-
It is forbidden
to deposit items on the Quadsaw which can harm persons/animals or damage property should they
fall.
-
It is forbidden
to abandon the Quadsaw and leave it unattended. The
Quadsaw, the machine it’s attached to and the
work area should always be monitored.
-
It is forbidden
to transport persons or items on board the Quadsaw while driving with the tractor.
-
It is forbidden
to transport the Quadsaw without the blade protection guards mounted.
-
It is mandatory
to check that all the safety devices of the Quadsaw are intact and functional before using it.
-
It is mandatory
to always inspect the work area for wire, steel posts, large stones and other dangerous materials. If
such items are found remove them.
-
It is mandatory
to check that the agricultural tractor on which the Quadsaw is installed is of adequate power, weight
and configuration, compatible with the model fitted.
-
It is mandatory
to comply with highway regulations in force in the country where the Quadsaw is used.
-
It is mandatory
to never drive with wire or the like wrapped around the blades / knife axles. Stop immediately and
remove the unwanted material.
-
It is mandatory
to verify that the ground on which the tractor moves is level and sturdy, before using the Quadsaw.
-
It is mandatory
for the environment where the Quadsaw operates to have adequate lighting. Insufficient or excessive
lighting may pose a risk to the operator.
-
It is mandatory
to familiarize yourself with the control devices and their functions prior to starting work;
-
It is mandatory
to make sure that the maximum number of revolutions of the blades is no more than 4000 rpm when
powering the Quadsaw.
-
It is mandatory
to make sure there is no more than 200 bar oil pressure in the hydraulic hoses.
-
It is mandatory
to use suitable clothing. Strictly avoid long or loose clothing that could be caught in any way by
moving parts. Wear suitable helmets, glasses, gloves, footwear, etc.
-
It is mandatory
to lower the Quadsaw attached to the reach arm or carrier frame, switch the combustion engine off
and remove the ignition key from the dash of the tractor and engage the parking brake
before leaving the driver’s seat.
-
It is mandatory
for the maintenance and adjustments to always be performed with the Quadsaw switched off and
disconnected from the power.
- It is mandatory
to never stop the engine, when the power transmission is engaged.
-
It is mandatory
to stop the Quadsaw and inspect it if abnormal vibration is noted or have it inspected by personnel
assigned by the manufacturer until the causes are identified and eliminated.
-
It is mandatory
to contact a dealer if the Quadsaw stops during operations or a component malfunctions.
-
It is mandatory
to always verify, before starting up the Quadsaw, that no persons and/or animals are within 50
metres in any direction from the machine.
-
It is mandatory
, to always ensure all cab safety guards are in place and all tractor windows are closed when the
machine is in use.
-
It is mandatory
to periodically verify that the screws and bolts are tightened and secure, especially those that secure
the blades.
-
It is mandatory
to use the types of lubricating oils indicated by the manufacturer.
-
It is mandatory
to periodically check the integrity and functionality of the safety devices.
-
It is mandatory
to comply with the laws in force in the country of installation on the use and disposal of products used
for cleaning and performing maintenance on the Quadsaw, considering the recommendations of the manufacturer of
the given products.
-
It is mandatory
for the Quadsaw to be handled without being subjected to impact with other objects which could
compromise the optimal functionality of the machine.
-
It is mandatory
for the Quadsaw to be lifted adequately and with suitable lifting accessories and harness and
according to the regulations in force in the country where these operations take place.
