Speakerbus ARIA Touch, User Manual

Page: 72 / 95

72
ARIA Touch User Guide
Remote Desktop Access
Group calls
An intercom group call connects all logged in members of a predefined internal user group
simultaneously.
There are three types of group calls:
• Standard Group Call . A call used to make announcements to members of the group call.
Members receiving the announcement are unable to talk back to the group.
See Making a group call on page 74 .
• Mixing Group Call . A call used to make announcements to members of the group call.
Members, who have talk permission, can talk within the group call.
See Making a group call on page 74 and Talking on a mixing group call on page 75 .
• Answerback to Owner Group Call . A call comprising a group of users in which only the call
initiator can talk to the group. The call initiator can request that another member of the group
responds to the call.
If another member of the group responds, the group call is dropped and a point-to-point call
is established between the initiator and the responding member. Any member who receives
the call may respond to the initiator.
See Making a group call on page 74 and Talking on an answerback group call on page
75 .
Talk permission is required to initiate a group call, to talk on a mixing group call and to respond
to an answerback group call.
Making an intercom call
To make an intercom call:
1. Touch the intercom dashboard softkey as highlighted below.
2. Enter the dial number using the dial pad and touch the DIAL softkey.
OR
Enter the first few letters of the user name using search.
From the list, touch a user to call as shown below.