User Manual
CO1-2 Combiner
Page 23 of 36
3.6 CAT, ALC, PTT cables without PC.
To be built if the old CAT cable is not available (see chap. 3.3 point 6).
The radio connectors are described in the specific manual.
Check whether the RTS-CTS jumper, if any, is required or not.
Note: WARNING, SPE is not responsible for any hardware fault resulting from incorrect
interfacing.
PTT, ALC, CAT Icom CI-V cables
This interface is standard for all Icom models equipped with CAT, the cable always ends
with a 3.5 mm mono plug.
It is also possible to use a stereo plug as shown in the diagram.
The plug is inserted into the "Remote" connector of the transceiver.
Set “CI
-
V Output (for ANT) ON” (if present) on its menu.
Set "CI-V Transceive ON" in the transceiver menu.
The PTT and ALC cables have RCA connectors and are supplied with the amplifiers.
They can be inserted in the sockets of either the first or of the second amplifier.
