USER MANUAL
AM-01/6
Pag. 3 di 14
We congratulate you on the choice of the Remote Antenna Matrix AM-01/6 system
with which it is possible to remote up to 6 antennas with a single coaxial cable.
No other cable is needed because, in addition to the RF, also DC power and data
commands are sent by the cable.
The remote Matrix is controlled by the Control Box AMB-02 directly connected to
the amplifier, no further specific software settings are required in addition to the
one already present.
With a particular version of the Remote Antenna Matrix AM-01/6 system it is also
possible to automatically manage operations in SO2R.
The system is designed for Expert 1.3K-FA, Expert 1.5K-FA, Expert 2K-FA
amplifiers and Combiner CO1-2.
In particular, for the Expert 1.3K-FA and Expert 1.5K-FA the AM-01/6 is able to
bring the antennas managed from 4 to 6.
IMPORTANT
Before installing and using the system, we recommend that you carefully read the
instructions contained in this manual.
Failure to comply with these instructions results in voiding the warranty.
Keep the manual, it contains important information regarding the safety and
correct use of your AM-01/6
The manual may be subject to changes, we recommend that you periodically
consult our website
The English version is to be considered the official one.
The Remote Antenna Matrix AM-01/6 is essentially passive and therefore does not
require FCC certification (where required) for amateur radio use.
CAUTIONS
WARNING!
DO NOT disconnect, swap, replace coaxial cables during transmission, there is a
danger of electric shock or burns.
WARNING!
Before powering on AM-01/6 and AMB-02 check the correctness of the power
supply value
.
