background image

 

USER MANUAL 

AM-01/6 

 
 

INDICE

 

Pag. 13 di 14

 

WARRANTY TERM 

 
SPE  warrants  to  the  original  Purchaser  that  this  product  shall  be  free  from  defects  of 
materials or workmanship. 
 

SPE  warrants

 

for  two  (2)  years  from  the  date  of  original  purchase  that  SPE  will 

provide  free  of  charge  all  parts  and  labour  necessary  to  correct  defects  in 
material  or  workmanship.  The  Purchaser  only  has  to  pay  all  the  shipping 
expenses for warranty service work.  

 
Customers should address requests for warranty  service work to the Distributor/Dealer 
where they made their purchase. As part of their reseller agreement with SPE, they are 
responsible for service support. 
If  the  Distributor/Dealer  has  closed  down,  or  when  the  Purchaser  moves  into  another 
area, SPE will be directly responsible for warranty service at their factory in Rome. The 
shipping  expenses  to  and  from  SPE  will  then  be  paid  by  the  customer.  Any  repair 
requests  to  other  dealers  will  be  subject  to  specific  direct  negotiations  between  the 
customer and the dealer.

 

 
In order to not invalidate the warranty service, the original Purchaser must complete the 
warranty registration card, and send it to SPE within 30 days from the date of purchase. 
Unless otherwise agreed, the products will be delivered ex-works from the factory of the 
seller. 
The delivery, even in the event of a return for repair, is understood to be completed with 
the delivery of the goods to the carrier specified by the Purchaser or, failing that, to the 
carrier chosen by SPE.  
The products will travel at the risk of the Purchaser even if, at the request of the same 
one or for other causes, SPE should carry out transport or choose the carrier. 
 
If  the  original  Purchaser  finds  some  defects  after  having  received  the  equipment,  he 
must  immediately  notify  the  Distributor/Dealer  of  the  defects  found  by  sending  a 
properly  completed  description.  Replacement  of  the  System  may  be  done  by  SPE  in 
exceptional  circumstances  and  at  SPE’s  complete  discretion.  In  any  case  no 
replacement will be provided if more than 20 days have passed after initial delivery. 
 

In case of a purchase of a used System

, in order to retain the warranty’s validity, it is 

necessary to notify SPE of the following data: 

  Purchase document from the previous owner. 

  Invoice for the original purchase. 

 
Replacement of equipment in these circumstances is not an option. 
The warranty will still be valid for two years from the date of the first purchase. 
 
The  warranty  does  not  apply

 

either  if  the  certificate  of  the  first  purchase  (invoice)  is 

missing or

 

to any defect that SPE determines is due to: 

1.

  Improper  maintenance  or  repair  by  persons  not  authorised  by  SPE  to  carry  out 

such work, including the installation of parts or accessories that do not  conform 
to the quality and specifications of the original parts. 

2.

  Misuse, abuse, neglect or improper installation, non-observance of user manual. 

3.

  Carelessness, accidental or intentional damage. 

 

Summary of Contents for AM-01/6















Reviews: