ELECTRICAL AND PEDICURE SPA COMPONENT SPECIFICATIONS
All electrical connections MUST be made by a qualified, licensed electrician, in accordance with Local & National
Electrical and Building Codes. An 110V-50/60 Hz, 15 Amp, GFCI protected grounded circuit MUST be used to
supply power to the Pedicure Spa. A dedicated circuit must be used with a GFCI. All wiring must conform to National
& Local Electrical Codes.
!
Warning
It is extremely important that the foot spa operates with GFCI protection
VERY IMPORTANT Both back of chair and seat are adjustable. When both are at maximum positions one must allow
18” (44cm) from back wall to foot spa. This minimum distance assures unobstructed recline. Failure to follow this
required dimension might damage your spa components and plumbing connections, which will void your warranty
PEDICURE SPA SPECIFICATIONS:
Construction: Marble composite, high gloss, acetone-resistant gel coat.
Two (2) electro-mechanical knobs control the drain and whirlpool.
Electro-mechanically operated reclining, massaging, and sliding seat with hand held control.
One (1) pipe-less whirlpool jet. (Pipe-free technology)
Power drain or Gravity drain
Extendable water spray positioned well above water line, air gap is accommodated with backflow
prevention required by plumbing code
Depending on pedicure spa model, arms may swing open, swing up / down or slide forward / backward.
SPECIFICATIONS
Spa Dimensions & Weights
Adjustable Stool
All Spa (seat-up-right): L≈51”-52” (129-132cm), LUXE model Length =
52” (127cm)
W=22” (56cm) w/ Tray ≈ 45”-46” (114-116cm) H = 58” (147cm)
*Clearance of 18” (20.32cm) needed for recline
Empty Weight: ~ 220 lbs.
Shipping Weight: ~ 250 lbs.
Pedicure Stool: 12” – 13”. Manicure Stool: 16.25” – 20”
Spa Water
~ 4.5 US Gallon
Jet Motor
120VAC, at 85W 60Hz
Massage Motors, Seat Sliding &
Reclining
24 VDC, 5 Amp
Discharge Pump
Motor – 120V at 85W 60Hz
Maximum vertical lift: 3ft
Flow rate 500 GP level
Power source
115VAC, 60Hz
Power needed per spa chair = 6 Amp
2 Air Switches
For control, turn Whirlpool Jet and Drain
Plug & Play Installation
Installation should be made with connection at the external interface
parts.
Please consult with your local plumber
Safety
Spatech® is UL listed.
