7
Original Instructions
EN
the care taken, please notify the authorised service
centres for warranty and post-warranty servicing of
SPARKY power tools.
GENERAL INSPECTION
Regularly inspect all fasteners and ensure they are
properly tightened. Should any of the screws be loose,
retighten it immediately to avoid hazards.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in order
to avoid a safety hazard.
CLEANING
Clean the spindle and the wheel guards from time to time
(Fig.6)
. Exterior parts may be cleaned with a damp cloth
and mild detergent if necessary.
Never use alcohol, petrol or other cleaning agent.
Never use caustic agents to clean plastic parts.
WARNING:
Water must never come into con-
tact with the tool.
VIII - Warranty
The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee.
Faults due to defective materials implemented as well as
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
pages-MBG-L-2012.indd 7
19.11.2012 г. 13:37:50 ч.
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
