HP10 Series 1-Phase
AC EV Charging Station
User Manual
- 25 -
parameters on this page.
Fig. 6-5 Set parameters to config the EV charging station
After setting, click the “SAVE” button to save the settings, and click the “RESTART” button to
restart charging station for settings take effect. Enter your WiFi name and password in the page.
After it takes effect, the charging station can access Internet via your WiFi.
6.4.
Start Charging
a)
Park your EV into place, turn off, and put the EV under braking.
b)
Pick off the charging connector form empty socket of EV charging station.
c)
As shown in Fig.6-6, plug the charging connector into the AC charging socket of the EV.
d)
For the charging control mode of “Button-controlled”, press the button after EV connector
plug in, the charging will start automatically.
