manualshive.com logo in svg

spaceslide BEDSIDE UNIT & DRAWER BOX, Assembly Instructions, Page: 1 / 4

Share
Download
spaceslide BEDSIDE UNIT & DRAWER BOX Assembly Instructions Download Page 1

Call: 0800 9803499

SS_INSTRUC_BU_10.2018_V2.1

www.spaceslide.co.uk/diy-installation-and-information

Page 1 of 4

BEDSIDE UNIT & DRAWER BOX

(450mm wide)

Assembly Instructions

CONTENTS:

A

  1x Top panel

B 

1x Back panel

C

  1x Side panel (right)

D 

1x Side panel (left)

E

  1x Drawer infill panel

F

  1x Base

G

  4x Soft close drawer runners

  (2x left, 2x right)

H   

1x Metal infill strip

I    

2x Drawer backs

J

  2x Drawer sides (left)

K 

2x Drawer sides (right)

L

  2x Drawer fronts

M

  2x Drawer bases

N

  4x Legs (Bedside unit only)

16x 

Wooden 

dowels

20x 

Wooden 

dowels

12x 

Euro 

screws

16x 

Wood screws

*

4x 

Leg brackets

*

*Wood screws and leg brackets 

are used on the bedside unit only.

Legs required for the 

bedside unit only.

Pozi screwdriver

RECOMMENDED TOOLS:

4x 

Cams

14x 

Cams

14x 

Dowels

4x 

Dowels

We recommend assembling on a 

soft surface (e.g a carpet). If this 

isn’t possible, use a protective cover 

on your hard surface floor.

BEDSIDE UNIT / DRAWER BOX PACK

DRAWER PACK

V2.1

Summary of Contents for BEDSIDE UNIT & DRAWER BOX

Page 1: ...2x Drawer backs J 2x Drawer sides left K 2x Drawer sides right L 2x Drawer fronts M 2x Drawer bases N 4x Legs Bedside unit only 16x Wooden dowels 20x Wooden dowels 12x Euro screws 16x Wood screws 4x Leg brackets Wood screws and leg brackets are used on the bedside unit only Legs required for the bedside unit only Pozi screwdriver RECOMMENDED TOOLS 4x Cams 14x Cams 14x Dowels 4x Dowels We recommend...

Page 2: ...2 ISSUED TO SUPPLIER Page 2 of 4 1 2 3 4 Apply to both panels D C 1 Insert the dowels and cams into the drawer infill E 2 On the metal strip H remove the plastic backing from the double sided tape then stick the metal strip to the infill E Apply to both panels A F x4 x8 x4 x3 x1 x4 PRELIMI ISSUED BY A SIMM ISSUE DATE 18 06 12 QUOTATION PURPOSES ONLY ISSUE ISSUED BY A SI ISSUE DATE 18 06 12 ISSUED ...

Page 3: ...7 8 Base Shown from underneath Top panel Top panel Back panel Back panel Cams Cams C C D D If the top panel A won t locate loosen the cams in the back panel B If the base panel F won t locate loosen the cams in the back panel B Once in place tighten the cams Insertthescrewsintotheholesshownonbothsides D C Left handrunnershownabove Repeat on both sides 5 x2 9 x3 FIX THROUGH THESE HOLES HIGHLIGHTED ...

Page 4: ...rs 12 13 Turn to adjust height Locking button Pulltheslidingpartofthelower drawersoutfirstandholdinplace 1 Pull the sliding part of the lower drawer runners out and sit the drawer on top Whilst holding the runners in place slide the drawer back until the drawer clicks into place 2 Use the locking button to secure the drawer Repeat for all drawers To remove a drawer reverse the operation 1 2 14 ATT...

Reviews:

No comments