Spacelabs qube 91390, Service Manual

Page: 62 / 160

www.spacelabshealthcare.com 4 - 8
9 1 3 9 0
Q U B E
M
A I N T E N A N C E
Figure 4-2 Battery Switch On Symbol
For Option A
1 Remove the external power supply cable and battery or batteries,
if present.
2 Remove the patient parameter module.
For Options B and C
1 Remove the external power supply cable and turn the battery
switch to off.
2 Remove the patient parameter module.
Remove the Bezel Assembly
1 Place the monitor face-down on a stable and padded surface.
2 Remove the eight finishing plugs from the rear enclosure as
shown in
Figure 4-3 for option A.
3 Remove the 10 screws from the rear enclosure, as shown in
Figure 4-3 .