www.spacelabshealthcare.com
8 - 5
X P R E Z Z O N
A N D
Q U B E
O
P E R A T I O N S
M
A N U A L
R
E C O R D I N G
/ P
R I N T I N G
To make a recording of all currently shown patient
parameters
1
From the main taskbar, touch the
Printer
icon twice.
The
Recorder
menu shows.
2
Touch
Record All
.
Eight seconds of the currently shown patient parameters are
sent to the printer.
To start a continuous recording
1
From the main taskbar, touch the
Printer
icon once.
The
Continuous Record
button shows in the lower left corner of
the display, and all parameter keys flash for two seconds.
2
Touch
Continuous Record
. Touch up to four flashing parameter
keys.
The parameters you selected are sent to the printer.
To stop a continuous recording
1
From the main taskbar, touch the
Printer
icon once.
When a recording is already in progress, the
Stop Continuous
Record
button shows.
2
Touch
Stop Continuous Record
.
The recording stops.
To print Vital Signs
1
From the main taskbar, touch the
Printer
icon twice.
The
Recorder
menu shows.
2
Touch the
Print Vital Signs
button.
The report prints.
Group Recordings
The monitor can be pre-configured to print two sets of recordings, A and B, that
consist of specific beds and patient parameters. These preselected recordings are
always eight seconds in duration. The printer does not combine the parameters of
different patients onto the same printout. Instead, it prints all of the requested
parameters for one patient before printing the parameters for the next patient.
To print a preconfigured recording set
1
From the main taskbar, touch the
Printer
icon twice.
The
Recorder
menu shows.
2
Touch either
Record Preselected A
or
Record Preselected B
.
The preselected set of parameters is sent to the printer
