Space-Ray PCA-SS 100, Assembly, Installation And Operation Instructions, Page: 57 / 62

Form 43343110
-56- May 2021
IGNITION MODULE DIAGNOSTICS
Flame Fault
If at any time the main valve fails to close completely and maintains a flame, the full time flame sense circuit will
detect it and energize the combustion blower. Should the main valve later close completely removing the flame
signal, the combustion blower will power off following the post purge period.
Fault Conditions
Error Mode LED Indication
Internal Control Failure Steady On
Air Flow Fault 1 Flash
Gas valve failure (stuck open) 2 Flashes
Ignition Lockout 3 Flashes
The LED located on the ignition module will flash ON
for ¼ second, then OFF for ¼ second during a fault
condition. The pause between fault codes is 3
seconds.
21.0) INSTALLATION DATA
Date of
Installation: # of Heaters in
System:
Serial
No.
Defender Model: PCA-SS
N = Natural Gas
L = Propane Gas