SP VirTis BenchTop 2K, Operator'S Manual

Page: 12 / 56

Introduction VirTis BenchTop 2K, 4K and 6K
2 Revision 004, 12/09
Available Configurations
Freeze-drying in
the condenser
Shelf unit in
drum manifold Vertical manifold
Flask drying on
drum manifold Flask drying on drum
manifold with stoppered Fitted for cold
trap application
shelves
From Freeze Dryer to Condenser Module
When using your BenchTop as a condenser module, the vacuum cover plate is
replaced with either a ¾-inch stainless steel port for the manifold plate or a plain cover
plate, which must be purchased separately if no manifold is ordered. The manifold
adapter plate is required when any manifold is purchased.
Cold Trap Condenser Module
When using a vacuum concentrator or gel dryer with your BenchTop unit, the
condenser module can be used as a cold trap, which traps vapors driven off of the
product before they reach the vacuum pump. For more information, refer to Chapter 6:
Cold Trap Condenser.
Note: A low temperature condenser is required when trying to trap organic solvents.
© SP Industries, Inc. 2009