Rev 002, 01/14
37
© SP Scientific 2014
Appendix
C
Appendix C: Shelf Latching
Shelf Latching Instructions
To latch shelves together on an AdVantage Pro using the optional shelf latching kit:
Configuration A: 2 to1 Shelf Latching
Item
Quantity
Description
A
4
Latching Rod Extension
B
8
Latching Rod
C
8
Shoulder Screw
Ensure that all shelves are empty.
1.
Ensure that the Pneumatic Cylinder Rod is fully extended.
2.
Remove the four (4) upper shoulder screws (Item C) and install the latching
3.
rod extensions (Item A). Remove only the upper shoulder screws installed in
the four (4) corners of the top shelf.
Replace and secure the four (4) upper shoulder screws (Item C).
4.
Raise the shelves to the Up position.
5.
To return to a 2-shelf arrangement, repeat the process and remove the
6.
latching rod extensions (Item A). Ensure that the shoulder screws are secured
before raising the shelf stack.
Stoppering Plate
Radiant Shelf
1
st
Shelf
2
nd
Shelf
C
C
B
B
A
A
5.6 in
(142.2 cm)
Summary of Contents for VIRTIS ADVANTAGE PRO
