Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik
13
2.4
Personal protective equipment
It is recommended to wear personal protective equipment when working with the stud
welding system and universal feeder.
Danger due to a lack of or incorrect PPE
During stud welding, there is a risk of burns, especially due to hot welding spatter.
The formation of strong electric arcs can also cause a glare hazard.
Always wear suitable, closed protective clothing.
Type and extent of the protective equipment depends on the respective
occurrence and intensity of welding spatter, arcs and/or noise. This varies
depending on the basic material, stud material, stud size and required
welding performance.
Please observe the following instructions for protective equipment.
Recommended personal protection equipment
Protective goggles
Welding spatters and a flash of light occur during
welding. In order to protect your eyes, wear appropriate
safety goggles with side protection and a filter protector,
if necessary.
Protective gloves
During welding, the workpieces and parts of the welding
gun get hot and welding spatters occur. Wear
appropriate, non-combustible, heat-resistant protective
gloves.
Protective clothing
Welding spatters occur during the welding process.
Wear appropriate, non-combustible and, if necessary,
heat-resistant, protective clothing.
Safety shoes
Welding spatters occur during the welding process.
Wear appropriate, non-combustible, heat-resistant
safety footwear.
Hearing protection
Depending on the welding device and the welding
application, relatively loud welding noises may occur. In
that case, wear appropriate hearing protection.