Soyer BMK-10i, Operating Instructions Manual, Page: 29 / 74

Operating manual Soyer Bolzenschweißtechnik 29
7 Description of the SRM stud chuck
Each welding gun is provided with a stud chuck that matches the welding stud.
For the SRM welding process, there are:
Adjustable stud chucks:

SRM stud chuck M6 - F05307

SRM stud chuck M8 - F05215

SRM stud chuck M10 - F05217

SRM stud chuck M12 - F05219
The stud chuck in the gun must be installed/changed in accordance with the stud
diameter.
Adjustable stud chucks must be set to the stud length.
7.1 Setting the SRM stud chuck
SRM stud chucks must be set to the length of the welding stud and, if necessary, to the
gun size.
The standard stud chuck can hold studs up to a length of 60 mm.
Different stud diameters require different stud chucks.
When using studs with a length > 45 mm, the end stop screw must be
shortened.