SOYAL
®
AR-837-EL
V200515
AR-MDL-721V
CN4
CN6
CN3
CN8
CN13
CN5
3CM
8.5CM
2CM
2CM
2CM
6CM
6CM
6CM
1
Contents
QR Code Scan Area
Specification
2
Terminal Cables
The communication wires and power line should NOT be bound in the same conduit or tubing.
Don’t equip reader and lock with the same power supply. The power for reader may be unstable when the lock is activating, that may cause a
malfunction in the reader.
The standard installation: Door relay and lock use the same power supply, and reader should use another independent power supply.
Use AWG 22-24 Shielded Twist Pair to avoid star wiring, CAT 5 cable for TCP/IP connection
1.Tubing:
2.Wire selection:
3.Power supply:
1
Products
3
Tools
4
Optional
Notice
Any Wiegand Output Module (CN10)
(Voice Module)
A-1.Surface Mounted: Use a screwdriver to screw the mounting plate
to the wall. A-2.Embedded: To dig a hole for
AR-837-EL:128mmx109mm; and then, use a screwdriver to screw the
mounting plate to the wall.
Pull cable ends through the access hole in the mounting plate.
Attach AR-837-EL to the mounting plate and install screws (supplied)
into the holes at the bottom with the allen key.
Apply power. LED (green) will light up with one beep.
Installation
AR-837-EL:
Key Features
Water proof Strip X2
Screws
A-1.Surface
Mounted
A-2.Embedded
B.
or
1
2
Type of Bar
Code
Density
Min. distance Max. distance
Code 39
0.125 mm
(5 mils)
4.0 cm
9.0 cm
0.375 mm
(15 mils)
4.0 cm
25.0 cm
UPC/EAN
0.375 mm
(15 mils)
4.0 cm
25.0 cm
Code93
0.254 mm
(10 mils)
4.0 cm
21.0 cm
Support both 125kHz and 13.56MHz dual frequency RFID
Scan QR Code to easily open the door!
Support Date Limit or Frequency limit of QR Code access, with higher security!
Scan QR Code image on smartphones or printed on paper, with E Series controller to quickly scan QR Code
It is convenient for you to obtain the permission of access control, not only able to scan QR Code, but also supports EM and Mifare cards.
It is suitable for places that require the use of regular and short-term access, such as visitor systems, temporary building permit, dormitory,
suite management, and etc.
QRCo08A12345678
QRCo10A1234567890
QRCo14A12345678901234
QRCo55W1234556789
QRCo08H33CDAB88
QRCo16H001122334455667788
QR Code Module
Testing under lowest intensity
of illumination (250 lux)
QRCode supported format:
(The standard firmware supports QR Code format as below and other
QR Code format can be supported by customized firmware.)
(TCP/IP Module included RJ45 Connector)
(TCP/IP Module with POE function)
or
Ethernet : DMOD-NETMA10
DMOD-NETMA11
(TTL to RS-485 Converter)
AR-321L485-5V