background image

ASSEMBLY

 

 

 

 

 

Lift the flap and

hook the grass bag

over the plastic

hooks on the rear

of the mower.

Adjust the cutting

height levers on

each wheel, they

must all be set at

the same height.

Fill the petrol tank with 0.8l of normal 95 Octane petrol 

(standard unleaded) using a funnel and measuring jug.

 

To start the engine slowly 
pull the start cord out 
until resistance is felt 
(approx 10-15cm) then 
start the engine with a 
sharp vigorous pull. 

In cold weather it may be necessary to repeat the cold engine 

starting process.

 

To stop the mower release the stop/start 

bar.

IMPORTANT INFORMATION!

Always read the instruction manual thoroughly

before starting the lawnmower.

 

Never allow the starter cord to snap back.

Check the oil level before every use. 

Always use high quality detergent oil classified SAE30 oil 

(or equivalent eg 5W 30, often termed as 4 Stroke lawn mower oil).

Unpack the lawnmower ensuring all parts are present 

(see parts list overleaf) before discarding the packaging.

Insert lower handle

into the sockets in the

deck and push down

firmly until fully seated.

Fix with screws

provided.

3

Locate the rope guide

over the right hand

bolt so the 90° bend

sits on top of the

handle bar and secure

using the plastic knob.

4

Locate upper handle 4

bar on lower with the

bolts. Secure the left

bolt using plastic

tightening knob

ensuring cables are

not twisted.

Follow these steps to ensure quick and easy set up 

every time.

5

The engine does not

come with oil. Add a

minimum of 0.5 litres of

oil.

CHECK THE ENGINE OIL BEFORE

EVERY USE. 

7

6

8

Slowly pull out starter

cord & hook it through

the eye of rope guide.

This is where you start

the mower from.

11

Hold the stop/start bar 

firmly to the handle to 

disengage the motor 

brake and automatic 

cut out

If you have any difficulties please contact the

COLD ENGINE STARTING 

1

2

9

10

Using the cable

clamp provided,

secure the cables to

the handle without

trapping them.

When starting a cold 

engine, press down the 

primer fully 3~5 times.

When starting a warm 

engine, the primer 

does not need to be 

used.

Engine stop

Engine start

Min

Max

PREPARING YOUR MOWER

helpline on 01904 727503 email [email protected]  

or visit www.gardenservicecentre.co.uk

Reviews: