25
Southworth Products
DDL Dock Lift Manual
RAISE THE PLATFORM TO THE FULLY
1.
RAISED POSITION
REMOVE THE MAINTENANCE DEVICE
2.
FROM THE STOWED POSITION AND
PLACE THE END OVER THE POST.
LOWER THE PLATFORM UNTIL
3.
RESTING ON THE MAINTENANCE
DEVICE. WHEN ENGAGED, THE
MAINTENANCE DEVICE MUST REST ON
THE UNDERSIDE OF THE PLATFORM.
DAMAGE MAY OCCUR IF
MAINTENANCE DEVICE IS RESTING ON
STRUCTURAL REINFORCEMENTS
MAINTENANCE DEVICE STOWED
POST
POST
MAINTENANCE DEVICE ENGAGED
WHEN ENGAGED, THE
MAINTENANCE DEVICE MUST
REST ON THE UNDERSIDE OF
THE PLATFORM. DAMAGE MAY
OCCUR IF MAINTENANCE
DEVICE IS RESTING ON
STRUCTURAL
REINFORCEMENTS
HINGE END
HINGE END
Other maintenance device
styles may be used. Contact
customer service is machine is
equipped with a style other
what is shown.
6.2
Periodic Maintenance
Before each use, ensure area is clear of debris and sump/drain is clear and there is no
standing water under the lift table. Inspect the machine for excessive wear or damage and
ensure all precautionary labeling is legible. Inspect railings, verify flexible restraints and throw-
over plate pull cable are in place and in good condition. Verify push button switch and cord are
functioning and are not damaged.
6.2.1
Weekly Maintenance
• Inspect leg rollers, center pivot pins and bushings, and leg hinge pins and bushings for
excessive wear or damage. Repair or replace as necessary.
• Inspect machine for loose of broken fasteners. Repair or replace as necessary.
• Inspect labeling. If any label is damaged or otherwise illegible contact the manufacturer
for replacement labels.
