MODEL NUMBER: 80650600XX
DATE: 08/05/2011
Page 1
INSTALLATION GUIDELINES
CAMEL BACK CLIMBER
80650600XX
USER GROUP:
5 - 12
RECOMMENDED CREW:
2 people
TOOLS REQUIRED:
T-45 TORX tool (supplied by manufacturer)
Level
3/8” allen head tool
Tape
measure
Auger / Post hole digger / Shovel
21/64 drill bit
High speed 3/8” electric drill
w/clutch
NOTE:
Use of any other driver may result in damage to tool and/or hardware!
INSTALLATION TIME:
2 hours
CONCRETE REQUIRED:
9.42 cubic feet
NOTE:
Concrete must have a minimum rating of 2,500 psi and must be mixed per
manufacturer’s
recommendations.
PRE-INSTALLATION CHECK:
Compare all items received to the packing list. Notify your local sales representative immediately if any
parts are missing or damaged.
We are not responsible for items discovered missing
after 72 hours from time of delivery!
Before beginning installation, make sure that you have read and understand the Installation Introduction
manual that was supplied to you. If you did not receive a copy, or if you have a question regarding
anything covered in this manual, contact your local sales representative.
