South Bend Tools
For Machines Mfd. Since 3/21
Model SB1119/SB1120
-53-
S E R V I C E
3.
Loosen (2) gib lock set screws shown in
Figure 87.
Gib Lock
Gib Lock
Set Screws
Set Screws
Figure
Figure 87. Location of fence gib lock set screws.
. Location of fence gib lock set screws.
5.
Adjust fence gib until scale displays 0".
— If fence is too far forward on table,
manually push fence toward back of table
until scale displays 0".
— If fence is too far backward on table,
tighten gib set screw until scale displays
0".
6.
Tighten gib jam nut from Step 4 and gib
lock set screws from Step 3.
Figure
Figure 88. Location of gib adjustment hardware.
. Location of gib adjustment hardware.
4.
Loosen gib jam nut shown in Figure 88.
Aligning Fence Faces
For safe and accurate shaping, the fence faces
must be parallel with one another so that they
properly support the workpiece through the
entire cutting operation.
Tools Needed
Qty
Hex Wrench 6mm .................................................1
Precision Straightedge 24" ...................................1
To align fence faces:
1.
DISCONNECT MACHINE FROM POWER!
2.
Raise and lock cutter guard so it is out of the
way.
3.
Unlock both fence lock handles and turn
micro-adjustment knobs fully counter-
clockwise (see Figure 89).
Fence
Fence
Micro-Adjustment
Micro-Adjustment
Knob
Knob
Figure
Figure 89. Fence adjustment components.
. Fence adjustment components.
Fence
Fence
Lock Handle
Lock Handle